Few Useful Tablet Press Considerations

• The upper section of the turret must have keyways. This ensures the
correct fixing of the upper punch.
• Modification to the feeder paddles may be required due to increased fill

• Tablet press monitoring systems can be adjusted to monitor the multitablet
outputs as standard.
• Calibration punch may be required for single sort rejection system
(available upon request)
• Granulation flow must be working effectively due to the increased fill
• The tablet press should be in good working order and critical dimensions
of the turret (punch guides and die pockets) should all be within
• Tablet diameter below 3mm may require reinforced tips, and the press will
need to be fitted with restricted fill cams

Share this:
Loading Likes...